Ph : (02) 8728 7800


107 Warren Road, Smithfield

New South Wales, 2164.


Tiles : Installing Ceramic Floor Tiles

Installing Ceramic Floor Tiles

Ceramic Floor TilesYou have prepared the floor, laid the subfloor, and you really are now worried to get innovative. Much like in the other two steps, you’ll need all the appropriate equipments before laying your floor tiles.

Tools of the Trade To Use

You already had most of the neccessary tools in the other two steps. However, for the flooring, you might not have some of them yet. A few of the devices you need are square, pen, your dependable tape-measure, a drill plus a mixing paddle, buckets for mixing the thin-set with water, and the same polymer thin-set mortar you utilized to lay your subfloor. Additionally, get tile spacers, a level along with a rubber mallet. A tile cutter or saw will be required to trim the tiles. Rubber work gloves, knee pads and safety goggles are recommended for your protection.

For finishes you might need aluminum angles for the doorways in which the tiling finishes.

With every device or substance used, continually follow the manufacturer’s guidelines and advise yourself of any relevant building codes.
Before laying the tiles, take tiles from different boxes and blend them together just in case there is a minor color variation in between each box.

Distribute the thin-set using a trowel in a one meter by one meter area and try not to cover your reference lines. You must beginning at the cross section at the center of the room in doing this. With this, mix the thin-set in line with the recommended regularity. With the notched edge of the trowel, comb the mortar at a 45 degree angle. Without creating swirl patterns, comb it in one direction. Make use of the trowel to grab any extra and give it back towards the bucket.

Over the reference lines, start laying the tiles. Press them down softly with a small twist and use spacers. Every few tiles, lift one up and have a look to see if it’s adhering well. With the trowel, add more adhesive if there exists hardly any adhesive applied. Obtain a trowel with bigger notches if this proceeds.

Use the level to be sure the tiles are even after concluding one section. Or else, use the mallet to even them out. Cut tiles for edges near cabinets, etc.

Keep laying the tiles and before you know it, this stage will be complete.

High quality tiles and tile items are for sale in TFO Tile Factory. Regardless if you are looking for tiles for the kitchen, bathroom or any room for that matter, the best place is TFO Tile Factory Outlet. They’ve over 60,000m2 of tiles ready for immediate pick-up. So taking something that you will like is certainly not hard.

Leave a Comment

Previous post:

Next post:

TFO Tile Factory Outlet - 107 Warren Road, Smithfield, New South Wales, 2164. Ph: (02) 8728 7800
Open: Monday – Friday 8am-4.30pm | Saturday 9am – 4:30pm | Sunday 10am – 3pm

Copyright © 2011 TFO - Tile Factory Outlet